Kenwood TS-990S - Manual (Page 41)

PANEL DESCRIPTION 2
2-15
Index Contents
Area Display Description Ref. Page
A
Appears while decoding in RTTY (FSK) or PSK mode. {page 5-35}
Displays the selected band to decode, either the main band or the sub band. {page 5-36}
Displays the selected IF filter. {page 9-8}
WIDTH: XXXX
Displays the passband width for the IF filter. Rotating the LO/WIDTH control reverses the display
numerals (from white on black to black on white) for 2 seconds.
{page 6-2}
B
Displays the current frequency. {page 4-12}
MAIN / Shows the selected band, either the main band or the sub band. {page 4-7}
M.SCR Appears while scrolling the memory channels. {page 10-4}
Appears while in Memory Channel mode. {page 10-4}
Appears while in Dual Memory Channel mode. {page 10-4}
Appears while in Quick Memory Channel mode. {page 10-4}
VFO Appears while in VFO mode. {page 10-4}
00
Displays the channel number, 00 to E9 while in Memory Channel mode or Memory Scroll mode
or Q0 to Q9 while in quick Memory mode.
{page 10-8}
C
Displays the X-Y scope.
Displays the tracing speed and level of roughness (Level 1 to Level 3) of the X-Y scope.
{page 4-4}
Displays the vector scope.
Displays the type of PSK, either BPSK or QPSK.
{page 4-4}
Ⓐ
Ⓑ
Ⓒ
X-Y Scope
Ⓐ
Ⓑ
Ⓒ
Vector Scope