Kenwood KDC-X8019BT - Manual (Page 13)

P.CONT
ILLUMI
REMOTE CONT
REMOTE INPUT
STEERING WHEEL
ANT.
CONT
MUTE
– +
L R
L R
English | 13
Connecting Wires to Terminals
FM/AM antenna input
AUX input (Stereo)
Use the mini-plug which is stereo type and
does not have any resistance. (3.5 mm ø)
Fuse (10A)
Wiring harness
(Accessory1)
If no connections are made, do not let the wire come out from
the tab.
Blue/White
(Power control wire)
Blue (Antenna control wire)
Orange / White
(Dimmer control wire)
When using the optional power amplifier,
connect to its power control terminal.
To car light control switch
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
power terminal for the booster amplifier of
the film-type or short pole type antenna.
(Max. 300mA, 12V)
Brown (Mute control wire)
To use the steering wheel remote control
feature, an exclusive remote adapter (not
supplied) that matches your car is required.
Light Blue/Yellow
(Steering remote control wire)
To connect the Kenwood navigation
system, consult your navigation manual.
Black (Ground wire) · (To car chassis)
Front output
Sub Woofer output
Rear output
B59-2091-00_00_FLIPQSG_M_EN.indd 13 11/12/28 12:03