5 pch scu configuration, Pch scu configuration -27 – Asus Z9PE-D8 WS User Manual

Page 95

ASUS Z9PE-D8 WS

4-27

Aggressive Link Power Management [Enabled]

Configuration options: [Enabled] [Disabled]
Port 1-6 Staggered Spin-up [Disabled]

Configuration options: [Enabled] [Disabled]

IDE Mode

Allows you to to enable or disable the SATA controllers.

Serial-ATA Controller 0 [Enhanced]

This item appears only when you set the SATA Mode item to [IDE Mode]. Set to

[Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s devices. Set to

[Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four SATA devices

are supported under these operating systems.
Configuration options: [Disabled] [Enhanced] [Compatible]
Serial-ATA Controller 1 [Enhanced]

This item appears only when you set the SATA Mode item to [IDE Mode]. Set to

[Enhanced] to support two SATA 3.0 Gb/s devices.
Configuration options: [Disabled] [Enhanced]
S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system.

When read/write of your hard disk errors occur, this feature allows the hard disk to

report warning messages during the POST.
Configuration options: [Enabled] [Disabled]

4.5.5

PCH SCU Configuration

This menu automatically detects and displays Device 1-4.

Device1

Not Present

Device2

Not Present

Device3

Not Present

Device4

Not Present

→←:

Select Screen

↑↓:

Select Item

Enter: Select Item

+/-: Change Opt.

F1: General Help

F2: Previous Values

F5: Optimized Defaults

F10: Save & Exit

ESC: Exit

Advanced