Rebuilding the raid with a new hard disk – Asus Z9PE-D8 WS User Manual

Page 155

ASUS Z9PE-D8 WS

5-33

3. The utility immediately starts rebuilding after the disk is selected. The status

of the degraded RAID volume is changed to “Rebuild”.

[

MAIN MENU

]

[

DISK/VOLUME INFORMATION

]

RAID Volumes:

= Data is Encrypted

ID Name Level Strip Size Status Bootable

0 Volume0 RAID1(Mirror) N/A 149.0GB

Rebuild

Yes

Physical Devices:

Port Drive Model Serial # Size Type/Status(Vol ID)

1 ST3160812AS 9LS0F4HL 149.0GB

Member Disk(0)

2 ST3160812AS 3LS0JYL8 149.0GB

Member Disk(0)

Volumes with “Rebuild” status will be rebuilt within the operating system.

[↑↓]-Select

[ESC]-Exit [ENTER]-Select Menu

4. Exit Intel Rapid Storage Technology and reboot the system.
5. Under Microsoft

Windows OS, select Start > Programs > Intel Rapid

Storage > Intel Rapid Storage Console or click the Intel Rapid Storage

Technology tray icon to load the Intel Rapid Storage Manager utility.

6. From the View menu, select Advanced Mode to display the details of the

Intel Rapid Storage Console.

7. From the Volumes view option, select RAID volume to view the rebuilding

status. When finished, the status is changed to “Normal”.

Rebuilding the RAID with a new hard disk

If any of the SATA hard disk drives included in the RAID array failed, the system

displays the status of the RAID volume as “Degraded” during POST. You may

replace the disk drive and rebuild the RAID array.
To rebuild the RAID with a new hard disk:
1. Remove the failed SATA hard disk and install a new SATA hard disk of the

same specification into the same SATA Port.

Select a destination disk with the same size as the original hard disk.

2. Reboot the system and then follow the steps in section Rebuilding the RAID

with other non-RAID disk.

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104

1. Create RAID Volume

3. Reset Disks to Non-RAID

2. Delete RAID Volume 4. Exit