Asus Z9PE-D8 WS - Manual (Page 115)

ASUS Z9PE-D8 WS 4-47
4.8 Boot menu
The Boot menu items allow you to change the system boot options.
Number of seconds to wait for
setup activation key.
65535(0xFFFF) means indefinite
waiting.
Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]
Full Screen Logo [Enabled]
CSM16 Module Version 07.67
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Enabled]
Boot Device Seeking [Endless PXE]
UEFI Boot [Disabled]
Boot Option Priorities
Boot Option #1 [AMI Virtual CDROMO...]
Boot Option #2 [IBA GE Slot 0600 v...]
CD/DVD ROM Drive BBS Priorities
Hard Drive BBS Priorities
Network Device BBS Priorities
Setup Prompt Timeout [xx]
Use the <+> and <-> keys to adjust the number of seconds to wait for setup
activation key.
Bootup NumLock State [On]
This item allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Full Screen Logo [Enabled]
This item allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
1. Set Full Screen Logo to [Enabled] to use the ASUS MyLogo2™ feature.
2. Set Full Screen Logo to [Disabled] to select the desired Post Report waiting
time from 1~10 sec.
Post Report [5 sec]
Allows you to select a desired post report waiting time. This item only appears
when you set the Full Screen Logo to [Disabled].
Configuration options: [1 sec] - [10 sec] [Until Press ESC
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Ai Tweaker Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit