Asus Z9PE-D8 WS - Manual (Page 87)

ASUS Z9PE-D8 WS 4-19
Turbo Mode [Enabled]
This item automatically allows processor cores to run faster than the base
operating frequency if it’s operating below power, current, and temperature
specification limit.
Configuration options: [Disabled] [Enabled]
P-STATE Coordination [HW_ALL]
This item allows you to change P-STATE Coordination type.
Configuration options: [HW_ALL] [SW_ALL] [SW_ANY]
CPU C3 Report [Disabled]
This item allows you to enable/disable CPU C3(ACPI C2) report.
Configuration options: [Disabled] [Enabled]
CPU C6 Report [Enabled]
This item allows you to enable/disable CPU C6(ACPI C3) report.
Configuration options: [Disabled] [Enabled]
CPU C7 Report [Disabled]
This item allows you to enable/disable CPU C7(ACPI C3) report.
Configuration options: [Disabled] [Enabled]
Package C State limit [C6]
This item allows you to set package C State limit.
Configuration options: [C0] [C2] [C6] [C7] [No Limit]
Energy Performance [Balanced Performance]
This item allows you to optimize between performance and power savings.
Configuration options: [Performance] [Balanced Performance] [Balanced Energy]
[Energy Efficient]
Factory long duration power limit 95Watts
Long Duration Power Limit 0
Allows you to set long duration power limit in watts. Use the <+> and <-> keys to
adjust the value.
Factory long duration maintained 1000 ms
Long Duration Maintained 0
Allows you to set time window which the long duration power is maintained. Use the
<+> and <-> keys to adjust the value.
Recommended short duration power1 1.2 * Long Duration
Short Duration Power Limit 0
Allows you to set short duration power limit in watts. Use the <+> and <-> keys to
adjust the value.