Asus Z9PE-D8 WS User Manual
Page 164
5-42
Chapter 5: RAID configuration
4. Use the up or down arrow key to move the selection bar and press
to configure further RAID settings.
RAID Level: Select a RAID Level. Configuration options: [RAID 0] [RAID 1]
[RAID 10] [HyperDuo]
Stripe Size: Specifies the size of single data block on the virtual disk. In
general, a larger stripe size is recommended for applications requiring large
data transfers such as audio, video, and graphics. A smaller stripe size is
better for applications with content in much smaller size, such as e-mails and
documents.
Configuration options: [32K] [64K]
Gigabyte Rounding: In the event of a single physical disk failure in a RAID
1 virtual disk, Gigabyte Rounding allows the replacement physical disk to be
of a size slightly smaller than the existing physical disk. The capacity of the
rebuilt virtual disk equals to the size of the smaller physical disk included in
the RAID 1 array. The configuration options represent the tolerance value of
drive capacity difference.
Configuration options: [None] [1G] [10G]
Name: Enter a name with 1–10 letters (no special characters) for the RAID
array.
5. Move the selection bar to Next and press
message appears:
Do you want to create this virtual disk ?
Y
es
N
o
Create Virtual Disk
Press
array appears under Virtual Disks, as shown in the image below.
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Configure->Select free disksCreate Virtual Disk
Help
Virtual disk configurations.
ENTER: Select F10: Exit/Save ESC: Return
HBA 0: Marvell 0
├
Virtual Disks
└
Free Physical Disks
* ├ PD 0: ST3160812AS
* └ PD 8: ST3160812AS
RAID Level : RAID 0
Max Size(MB) : 305253
Stripe Size : 64KB
Gigabyte Rounding : 1G
Quick Init : Yes
Name : Default
Threshold(%) : 90
Next
▶
▶