AMD GA-K8NSC-939 - Manual (Page 74)

GA-K8NSC-939 Motherboard - 74 -
English
SPDIF Output Device (Optional Device)
1. Connect the SPDIF output device to the rear
bracket of PC, and fix it with screw.
2. Connect SPDIF output device to the
motherboard.
3. Connect SPDIF to the SPDIF decoder.
(Note) If you want to use both of the 8 channel audio function and SPDIF out function, you may buy the
Audio Combo Kit (refer to the 8 channel Audio Setup section).
A "SPDIF_IO" connector is available on the
motherboard. The SPDIF output cable with rear
bracket could link to the "SPDIF_IO" connector (as
picture). For the further linkage to decoder, the
rear bracket provides coaxial cable and Fiber con-
necting port
(Note1) .