AMD GA-K8NSC-939 - Manual (Page 43)

BIOS Setup - 43 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU OverClock in MHz [200]
AGP OverClock in MHz [66]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.500V
AGP voltage control [Normal]
HT-Link voltage control [Normal]
DDR voltage control [Normal]
Hammer Fid control [StartUp]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
CPU OverClock in MHz
200MHz ~ 455MHz Increase CPU frequency as user selected.
AGP OverClock in MHz
66MHz ~ 100MHz Increase AGP frequency as user selected.
CPU voltage control
Supports adjustable CPU Vcore from 0.800V to 1.700V by 0.025V step. (Default value: Normal)
Normal CPU Vcore
Display your CPU normal Vcore voltage.
AGP voltage control
Normal Set AGP voltage as AGP required. (Default value)
+0.1v Increase AGP voltage +0.1V.
+0.2v Increase AGP voltage +0.2V.
+0.3v Increase AGP voltage +0.3V.
HT-Link voltage control
Normal Supply HT-Link voltage as HT-Link required. (Default value)
+0.1v Increase HT-Link voltage +0.1V.
+0.2v Increase HT-Link voltage +0.2V.
+0.3v Increase HT-Link voltage +0.2V.
DDR voltage control
Normal Supply DDR voltage as DDR required. (Default value)
+0.1v Increase DDR voltage +0.1V.
+0.2v Increase DDR voltage +0.2V.
Hammer Fid control
This setup option will automatically assign by CPU detection. The option will display "Locked" and
read only or will not show up if the CPU ratio is not changeable. The default is StartUp (set CPU
clock ratio to default value).
Incorrect using these features may cause your system broken. For power end-user use only.