American Dryer Corp. Gas HSI - Phase 7/FSS AD-78 III - Manual (Page 10)

6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Shaded areas are stated in metric equivalents
* For non-reversing models only.
** A minimum of 3/4” pipe must be supplied to the gas inlet for each dryer. Size of piping to dryer varies with installation conditions.
Contact factory for assistance.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
Gas
MAXIMUM CAPACITY (DRY WEIGHT) 75 lbs 34 kg
BASKET (TUMBLER) DIAMETER 44-1/2” 113.03 cm
BASKET (TUMBLER) DEPTH 24-7/8” 63.18 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft. 0.634 cu. m.
BASKET (TUMBLER) MOTOR 1 HP* 0.746 kw
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
DRYERS PER 20’/40’ CONTAINER 8/18
DRYERS PER 48’/53’ TRUCK 24/26
VOLTAGE AVAILABLE 120-460v 1ш, 3ш 50/60 Hz
APPROX. WEIGHT (UNCRATED) 888 lbs 402.8 kg
APPROX. WEIGHT (CRATED) 938 lbs 425.5 kg
HEAT INPUT 204,000 btu/hr 51,408 kcal/hr
AIRFLOW 1,200 cfm 33.98 cmm
INLET PIPE CONNECTION 3/4” N.P.T.**