High Country Tek HFS-2Q - Manual (Page 27)

Hydraulic Fan System Controller : HFS - 2
Dimensional Information: HFS-2
A
B C
3 x #8 screw
W
R
IN
C L
Label Inches Millimeters
A 3.77 96.0
B 1.89 48.0
Error
Prop Vlv PWM %
HFS-2
FAN SYSTEM CONTROLLER
S/No:- A00001
E D
THERM 3
THERM 2
THERM 1
P
W
COM
Reverse O/P ON
Reverse I/P ON
Reverse I/P +
+V Power I/P
+Prop Vlv O/P Thermistor 3 SIG
C Ø 0.186 5.0
D 3.82 97.0
E 3.10 78.8
F 0.46 12.0
G 3 25 82 6
NOT t l t t HCT F
MADE IN
U.S.A. www.highcountrytek.com
+Reverse Vlv O/P
0V Power I/P
-Reverse Vlv O/P
Alarm O/P
-Prop Vlv O/P
Thermistor 3 GND
Thermistor 1 GND
Thermistor 2 SIG
Thermistor 2 GND
Thermistor 1 SIG
G 3.25 82.6
H 1.6 41.5
I 0.64 16.5
J 0.26 6.5
NOT to scale, contact HCT
customer service for exact
dimensions F
G
I
J
H Shown with the standard
Weidmuller two part
connectors.
Housing Type:- HCT unique ‘encapsulated’ block.
Housing Material: Polycarbonate
Mechanical Information:
Housing Material:- Polycarbonate
Housing Color:- Black
Surface Finish:- Semi-Gloss
Housing Thickness:- ~16.5mm ( main module ) ~42mm incl. 2 way Connectors.
Unit size:- See above size detail drawings.
Unit Weight:- Approx.... 250 grams ( including Encapsulation material )
Wire entry:- Via heavy duty, polarized, two part ‘Deutsch’ connector.
Encapsulation:- Flame Resistant, Black , Two Part Epoxy Resin.
Mounting:- Via through holed ( 3 ) suitable for No. 10 ( 4mm ) screw .
Temperature range:- - 40 to +75 degrees Centigrade ( operational )
27