High Country Tek HFS-2Q - Manual (Page 22)

Hydraulic Fan System Controller : HFS - 2
Software Setup Guide – Dashboard level:
1
2
13
3
5 6
9
10
11
4
7 8
12
At the observer level, Dashboard, ‘Help’ and ‘Quit’ is the
only options available on the menu bar
1
9
Clicking this button starts the data logging process.
3
only options available on the menu bar.
Alarm and Status text window.
Error messages are in RED text.
The window stays as above while there are no errors or
alarms reported by the system and/or controller.
2
General display area for controller information and input /
output status.
9
Analog needle display and digital readout of ‘real-time’
output current to proportional valve drive. 10
Analog bar graph and digital readout of ‘real-time’ output
current as a % of the maximum set. 11
g gg g p
ALL of the parameters available in the item drop down
menu as well as other profile settings are logged for a
period of 256 samples . After the logging period, a popup
window asks for file name and storage location.
This file is saved with a *.csv extension which allows direct
import, reading and graphing in Microsoft Excel.
5
Status of the reverse ( Purge ) cycle ( auto or manual ) if
reverse is enabled and/or triggered. 12
Window where ‘Real-time’ graphing of selected parameter
in
is displayed
4
5
Clicking the HCT logo, prompts the user for the password
level required:- 13
in is displayed. 5
Drop down list of available parameters for display.
5
Digital representation of the parameter being displayed in 6
13
4
Real time graphing window 4
•
Wh th HCT l i li k d thi i d
22
Selects Slow, Medium or Fast graph time base setting.
7
Selects Graphic window scaling between FULL scale or
AUTO. Auto gives better resolution for lower values. 8
•
When the HCT logo is clicked, this window
will open and reset the access level to NONE.
• You must enter a password to enter a new
level.