AMETEK 7330 Pro-Stik II User Manual
Page 7
7
Specifications
Operating Voltage
13.5 to 30 VDC
Intrinsically Safe Barrier
See Installation Drawing E0240200 on page 9
Output
Operating Output
Diagnostic Output
4 to 20mA
3.9mA and 20.1mA, float outside of span
3.8mA, no signal received
(Note: Diagnostic Tolerance +/- 0.02mA)
Enclosure
Material Rating
Probe: 316 SS or PVDF
IP68
Operating Temperature
Hazardous Locations
------------------------------------------
Non Hazardous Location
Sensing Area
Electronic Area
-40°C to 70° C
--------------------------------------------------------
-40°C to 100° C
-40°C to 70° C
Probe Length
Stainless Steel R
Stainless Steel D, S, M
PVDF Style C
PVDF Style X
19” to 288”
18” to 288” * Consult Factory
20” to 192”
25” to 840”
Pressure Rating
316SS Probe: 1000 psi max.
PVDF Probe: 150 psi max.
Floats: Dependent. Call Factory.
Hazardous Areas Approvals
cFMus
-40° ≤ Tamb ≥ 70° C
Class I, II, III, Div. 1
Groups C, D, E, F, G, T4
Class I, Div. 2
Groups A, B, C, D, T4
Class I, Zone 0, AEx ia IIB T4
ATEX
Ex ia IIB T4
FM FM13ATEX0028X
(See PVDF installation note)
0344
II 1G
Resolution
0.025% of span or 0.014”, (Whichever is Greater)
Repeatability
0.014” + 0.05% of span typical,
0.014” + 0.4% of span maximum
Accuracy
0.1% of span or 0.050” (Whichever is Greater)
Null Zone
8”
Dead Band
2”
Specifications are subject to change without notice. Patented.
733
X
X
X
X
LLL
Fx
XXX
X
XX
Overall Length*
Mounting Style
X = None
C = “C” Version
T = Tri-Clamp
B = Fixed Bottom
P = C.I.P. (3A)
Connector Style
M = Mini
R = 1/2” NPT Right Angle
D = 3/4” NPT Dual
S = 3/4” NPT Single (Steel)
1/2” NPT Single (PVDF)
B = Fixed Bottom
Fittings
E = English
7330
Pro-Stik II
Output
0 = 4 to 20mA
1 = 20 to 4mA
Span*
# of Floats
F1 = 1 Float
F2 = 2 Floats
Special Mounting
XX = None
For B Mounting Style
Sx = Stainless Hsg
Cx = CPVC Hsg *
x0 = Std
For T & P Mounting Style
20 = 2”
25 = 2.5”
30 = 3”
40 = 4”
Part Numbering
* Specified in whole 1” increments.
See Data Sheet for ranges.
Style/Material
X = 316 Stainless Steel
V = PVDF
S = Sanitary (3A Approved)
F = Food Grade
High Temp. Applications
(NOT APPROVED for use in Hazardous Areas)
A = 316 Stainless Steel
B = Sanitary (3A Approved)
C = Food Grade