ARI Armaturen ARI-PACO 1,6kN EN - Manual (Page 3)

0040506001 1811 Page 3
Operating and installation instructions
Electric thrust actuator ARI-PACO 1,6 kN
1.0 General information on operating instructions
These operating instructions provide information on mounting and maintaining the fittings.
Please contact the supplier or the manufacturer in case of problems which cannot be
solved by reference to the operating instructions.
They are binding on the transport, storage, installation, start-up, operation, maintenance
and repair.
The notes and warnings must be observed and adhered to.
- Handling and all work must be carried out by expert personnel or all activities must be
supervised and checked.
It is the owner’s responsibility to define areas of responsibility and competence and to
monitor the personnel.
- In addition, current regional safety requirements must be applied and observed when
taking the fittings out of service as well as when maintaining and repairing them.
The manufacturer reserves the right to introduce technical modifications at any time.
These Operating Instructions comply with the requirements of EU Directives.
2.0 Notes on possible dangers
2.1 Significance of symbols
ATTENTION !
. . .
Warning of general danger.
ATTENTION !
. . .
Warning of dangerous voltage.
Exposed to injury!
Don’t touch the turning handwheel when the motor is running.
Exposed to injury!
Don’t put your hand into the up or downwards moving
appliance.
Danger when not observing the operating and installation
instructions!
Before installing, operating, maintenance or dismantling read
and observe the instructions.
Danger though voltage!
Before dismantling the hood, switch of the electrical source
and secure against turning on again.