4 - updating the driver, 5 - uninstalling the driver – HighPoint RocketRAID 2224 User Manual

Page 46

Text mode
Original mode

HighPoint Technologies, Inc.

4 - Updating the Driver

To update the driver, simply reinstall the driver following the steps in previous section, " Install
RocketRAID 2224 Driver on an Existing System ".

Note: If the driver is loaded in initrd (when system is installed onto a disk or array attached to the
RocketRAID 2224), you need to run the mkinitrd command to update the initrd file. If you are using the
lilo boot loader, run lilo again (# lilo).

5 - Uninstalling the Driver

To uninstall the RocketRAID 2224 driver

Note: The driver cannot be uninstalled while the system is booted from a disk or array attached to the
RocketRAID 2224.

To uninstall the driver, remove the lines added to /etc/modules.conf and /etc/fstab.