HighPoint RocketRAID 2224 User Manual

Page 33

HighPoint Technologies, Inc.

Connect to a Remote System (Continued)

Note: The initial user name/password for a remote system is RAID/hpt. You are free to modify the
username and password after the connection is established.
If the connection is successful established, the application will retrieve the event logs from the remote
system, then switch to Array Management view.

Disconnect a Remote System

This function closes the connection from a connected system. To disconnect a remote system:

1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to disconnect from.
3. Select the “Disconnect” command from the “Operation” menu.

System Configuration

This function is used to modify the service configuration on a remote system. To change the service
configuration:

1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the remote system you want to modify.
3. Select the “System Configuration” option from the “Operation” menu.
4. Modify the information in the pop-up window.

System Port - This is the TCP port number that the RAID Management Service uses to communicate with
RAID Management Console. When you connect to the service, the port value you enter must be in
accordance with the system port value on the service. The default value is 7402.