HighPoint RocketRAID 2224 - Manual (Page 12)

HighPoint Technologies, Inc.
4 - Verifying Installation
Once the RocketRAID 2224 host adapter and hard disks have been installed into the chassis, boot-up the
system to verify that the hardware is properly recognized.
0. Power on the system. If the system detects the presence of the adapter, the RocketRAID 2224 BIOS
will be displayed.
0. Press Ctrl+H to access the RocketRAID 2224 BIOS Utility.
The BIOS Utility will display information about hard disks attached to the adapter. Make sure all attached
disks are detected by this utility. If any of the hard disks are not detected, power down the system and
check the power and SATA cable connections.
8