3 - updating the driver, 4 - uninstalling the driver – HighPoint RocketRAID 2320 User Manual

Page 74

Text mode
Original mode

3 - Updating the Driver

To update the driver with a newer revision, simply reinstall the driver following the
steps discussed in the previous section, “Install the driver on an existing system”.

4 - Uninstalling the Driver

The driver can only be uninstalled when the system is not booting from devices
attached to the RocketRAID 2320 controller. To uninstall, remove the line
rr2320_load=”YES” located in /boot/defaults/loader.conf, and then delete the driver
module /modules/rr2320.ko or /boot/kernel/rr2320.ko.

6-9

FreeBSD Driver Support