HighPoint RocketRAID 2320 - Manual (Page 44)

Modify a Connection
This command modifies connection information for a remote system. To modify a
connection:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to modify.
3. Click the Modify button on the toolbar or select the “Modify” command from the
“Operation” menu.
4. Enter new connection information in the popup window, and click OK to apply
the changes.
Note: The System Address cannot be modified. If you insist on modifying this item,
you must first delete this connection and then add a new connection. In addition,
the connected system cannot be modified - you must first disconnect from this system.
Delete a Connection
This command deletes a remote system from the connection list. To delete a
connection:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to delete.
RocketRAID 2320 Driver and Software Installation
4-22