HighPoint RocketRAID 2320 User Manual

Page 69

Text mode
Original mode

for FreeBSD 5.2.1-RELEASE

ok load disk0:rr2320-5.2.1.ko

for FreeBSD 5.3-RELEASE

ok load disk0:rr2320-5.3.ko

for FreeBSD 5.4-RELEASE

ok load disk0:rr2320-5.4.ko

for FreeBSD 5.3-AMD64-RELEASE

ok load disk0:rr2320-5.3-amd64.ko

for FreeBSD 5.4-AMD64-RELEASE

ok load disk0:rr2320-5.4-amd64.ko

After the driver has been loaded, remove the floppy diskette from the floppy
drive.

Type in “boot” and continue with installation as normal. Refer to FreeBSD
installation guide for additional information.

ok boot

Note: On some systems, when ACPI is enabled, FreeBSD may not function
properly. Try disabling ACPI in the motherboard’s BIOS settings, or type the
command “set hint.acpi.0.disabled=”1”” under the boot prompt, in order to
solve the problem.

6-4

FreeBSD Driver Support