HighPoint RocketRAID 4460 - Manual (Page 46)

HighPoint RAID Management and Device Driver CD
Red Hat Enterprise/CentOS, Fedora Core, Open SuSE – Installing
the Web-based Management utility
Linux operating systems that support .rpm packages, allow you to double-click the
HighPoint Web RAID Management .rpm file to start the installation process.
1. Copy the Web RAID Management package from the RocketRAID 4460 Software
CD, to the desktop of the Linux operating system. The .rpm file is located in
HighPoint RAID Management Software – RR3xxx_4xxx - Linux – WebGui-Linux.
tbz.
2. Extract the .tbz file to the desktop, and browse to the appropriate .rpm file (there
are 32 and 64-bit options).
3. Double click the .rpm file – this should open the operating systems’ software
installer. Enter the Administrative password when prompted and proceed with
installation.
4. The package can also be installed manually, using a terminal. Lon in as “root”,
open a terminal, and browse to the location of the .rpm file. Run the following
command:
5. # rpm -i hptsvr-https-1.4-8.i386.rpm (or hptsvr-https-1.4-8.x86_64.rpm)
Note: The i386 rpm package can also work on 64-bit systems if you have 32-bit
runtime libraries installed. If you use the x86_64 rpm package, please make sure
the controller driver has 64-bit ioctl support.
46