HighPoint RocketRAID 2740 - Manual (Page 57)

57
a) Target Name – The GUI will ask that you enter a “new” name for reference (the previous
RAID configuration will be displayed until the procedure is complete). The array's name can
be changed after the expansion/migration process is complete.
b) Specify the Cache policy (Write Back is default).
c) Specify the block size (note: not available for all controller models – check the product
documentation).
d) Select the existing RAID disks, and the disks you wish to add to the array.
e) Specify the capacity. Maximum (all available space assigned to the array) is default.
f) Click “Create” to start the expansion/migration process.