HighPoint RocketRAID 2782 - Manual (Page 51)

HighPoint RAID Management Utilities (HRM)
51
1. The VSS option is provided towards the bottom of the Create Array menu.
In this example a 4-disk RAID 0 array was created, using 1TB hard disks.
A sector size of 1K is required for array with a capacity of 1-4TB.
2. After selecting the block size, the Web GUI will display a warning
message:
Select OK to continue. Click the “Create” button once more to create the
array.
3. The Web GUI will notify you that the array has been successfully created.
Click OK to confirm.
4. After creating the array, access the Windows Disk Management utility.
Click the “Start” button and select “Control Panel”.