HighPoint RocketRAID 2782 - Manual (Page 15)

RocketRAID BIOS Utility
15
Highlight the target disks using the arrow keys, then select using Enter. You
can use the arrow keys to select from the next set of disks (the screen will
display 16 ports at a time). A numeral will be displayed before each selected
disk. Once all target disks have been selected, press ESC. The utility will
display a warning, and ask you to press Y (yes) to initialize, or N (no) to
cancel. Once initialized, these disks can be used to create RAID arrays.
Warning: Initialization will destroy all pre- existing data on the
selected hard disks. Only initialize disks that do not contain
critical data
Creating Arrays:
Select Create from the toolbar and press Enter.