HighPoint RocketRAID 2782 User Manual
Page 39
HighPoint RAID Management Utilities (HRM)
39
Write Through – this option raises the level of data security. Data is
written directly to disk when this Cache Policy is enabled.
However, this lowers the overall performance of the array, when
compared to Write Back.
5) Assign hard disks to the array. To add a hard disk to the array, check
the box displayed before each disk’s entry. You can also use the
“Select All” button to quickly select all disks attached to the host
adapter.
6) Specify the capacity. Manually enter the desired RAID capacity (in
MB). If you wish to use all available hard disk capacity, leave the
“Maximum” entry in place, and proceed to the next space. If you
choose to specify the capacity, make a note that the remaining
capacity (unused space) can be used to configure additional arrays,
or set to act as a “spare” disk.
7) Once all of the RAID parameters have been specified click the
“Create” button to create the array. The utility will display a brief
summary after successfully creating the array: