HighPoint RocketRAID 2782 - Manual (Page 36)

HighPoint RAID Management Utilities (HRM)
36
9.
：This shows the OCE/ORLM procedure has been stopped or paused.
10.
：This icon is displayed above “Legacy Disks” – non-RAID disks
( ). The controller will assign this status to disks that contain valid
partition tables and/or useable data.
11.
：This icon is displayed above “spare” (
) disks。The controller
will use spare disks to automatically rebuild a critical array.
4 - Web GUI - Configuring an Array
This guide assumes that the hard disks have already been installed into the
external chassis, and attached to the card. These hard disks must be
initialized before they can be configured as arrays.
Initializing a new hard drive
Use the Initialize Devices option to prepare hard disks for use (creating
arrays, rebuilding arrays, expanding arrays, Spare disks).
1. Open the Web GUI interface, log-on, and select “Manage”, then “Device”
from the toolbar:
2. Click the “Initialize Devices” button towards the top of the screen:
3. This will open a small menu. Check the box before the disk you wish to