HighPoint RocketRAID 2782 - Manual (Page 28)

HighPoint RAID Management Utilities (HRM)
28
1. Copy the Web RAID Management package from the RR2782 Software
CD, to the desktop of the Linux operating system. The .rpm file is located
in HighPoint RAID Management Software –
\HighPoint RAID
Management Software\WebGUI\RR2xxx_3xxx_None-
OBM\Linux\WebGui-Linux.tbz.
2. Extract the .tbz file to the desktop, and browse to the appropriate .rpm file
(there are 32 and 64-bit options).
3. Double click the .rpm file – this should open the operating systems
software installer. Enter the Administrative password when prompted and
proceed with installation.
4. The package can also be installed manually, using a terminal. Log on in
as “root”, open a terminal, and browse to the location of the .rpm file.
Run the following command:
5. # rpm -i hptsvr-https-1.4-10.i386.rpm (or hptsvr-https-1.4-10.x86_64.rpm)
Note: The i386 rpm package can also work on 64-bit systems if you have 32-
bit runtime libraries installed. If you use the x86_64 rpm package, please
make sure the controller driver has 64-bit ioctl support
.