HighPoint RocketRAID 2782 - Manual (Page 41)

HighPoint RAID Management Utilities (HRM)
41
2) Click “OK” when the pop-up window is displayed. This will add the
disk to the Spare Pool.
3) To remove a Spare Disk from the Spare pool, click the box before the
target Spare Disk, and click the “Remove Spare” button:
The disk will be moved o the “Available Disk” Section
6 - Web GUI - Recovering an Array
When a redundant array’s status is “Critical”, fault tolerance is disabled.
The array is can be used in this format, but should be rebuild as soon as
possible. If a Spare disk was configured, the RocketRAID 2782 will use
this disk to automatically rebuild the array. If a spare is not available, the
array can be rebuilt manually.
If Auto-Rebuild is enabled, simply install a new disk – the RocketRAID
2782 will initialize the drive, and initiate the rebuild process. If the setting
is not enabled, follow the steps below.