Vaisala PTB210 (serial) - Manual (Page 24)

User's Guide ______________________________________________________________________
22 __________________________________________________________________ M210669EN-D
Wizard Software
The user-friendly Wizard software is designed to work in WIN3.X,
WIN95, and NT environment. The multi-point pressure corrections for
the PTB210 barometers are given through the serial line by using this
program. Moreover, a few settings of the instrument can be changed
using the Wizard.
Operation
First, check that the terminal software in use is closed before operating
the Wizard.
NOTE The Wizard uses either RS232 or RS485 interface. If the TTL level
interface is used, disconnect the RXD/TXD wires and then connect
the RX/TX wires (see page 12).
 To start the Wizard program in NT:
1. Double-click the My Computer icon.
2. Double-click the drive that contains the file.
3. To start the program, double-click the WIZARD . EXE -file.
OR
 To start a program by using the Run command in NT
1. Click Start, and then click Run.
2. In the Open box, type the location and name of the program
you want to start. Alternatively, browse the location, and
choose the name of the program (
WIZARD . EXE ). Then, click
OK.