Settings, Baud setting the baud rate, Setting the serial communication parameters – Vaisala PTB210 (serial) User Manual
Page 16: Settings .baud setting the baud rate
User's Guide ______________________________________________________________________
14 __________________________________________________________________ M210669EN-D
Settings
.BAUD Setting the Baud Rate
.BAUD.xxxx
xxxx =
baud rate (1200 ... 19200)
Example:
.BAUD.9600
(commands invisible)
.RESET
NOTE
To activate the new settings, please remember to reset the barometer
with the command .
RESET
Setting the Serial Communication
Parameters
The following parameter combinations are available with the PTB210
digital barometers. The factory setting for the parameters is E71.
.E71
or
.O71
or
.N81
The command sets the serial communication parameters of either a
single barometer or all the barometers in.
NOTE
To activate the new settings, please remember to reset the barometer
with the command .
RESET