Vaisala HMP42 - Manual (Page 69)

HMI41 AND HMP42
M210317EN-A Operating Manual
65
4.2 Using the serial commands
4.2.1 PLAY Transferring the data
To output the stored readings on your computer, turn the HMI41 on, type PLAY
and press ENTER. An example of outputting automatically stored readings:
>play
Reading Log... OK
data hh:mm:ss RH T Td
0 00:00:00 12.54 21.53 -8.48
1 00:01:00 12.10 21.23 -9.16
2 00:02:00 12.18 21.18 -9.12
3 00:03:00 12.12 21.15 -9.21
4 00:04:00 12.16 21.14 -9.18
5 00:05:00 12.09 21.12 -9.27
6 00:06:00 12.09 21.09 -9.28
>
An example of outputting manually stored readings:
>play
Reading Log... OK
data RH T Td
12.54 21.53 -8.48
1 12.10 21.23 -9.16
2 12.18 21.18 -9.12
3 12.12 21.15 -9.21
4 12.16 21.14 -9.18
5 12.09 21.12 -9.27
6 12.09 21.09 -9.28
>
If you know the starting time of the automatic data collecting, type it with the
command; for example:
>play 15:05
Reading Log... OK
data hh:mm:ss RH T Td
0 15:05:00 8.52 23.69 -11.70
1 15:06:00 9.58 23.66 -10.26
2 15:07:00 9.60 23.50 -10.35
3 15:08:00 9.61 23.30 -10.48
4 15:09:00 9.65 23.25 -10.47
5 15:10:00 11.22 23.41 -8.44
6 15:11:00 9.93 23.30 -10.08
7 15:12:00 9.92 23.22 -10.15
>
4.2.2 CPLAY Setting characters between decimals and fields
Type CPLAY and press ENTER to see the characters between decimals and
fields. An example:
>cplay
Desimal separator : .
Field separator : TAB
example:
1 01:00:00 38.72 21.61 7.01
>