Vaisala HMP42 - Manual (Page 40)

HMI41 AND HMP42
Operating Manual
M210317EN-A
36
7.2.3 HELP Outputting all available commands and their
contents
If you wish to see which commands are available, type HELP and press
ENTER. The following list appears:
>help
Available commands :
HELP ? PLAY CPLAY
Type HELP for more help
>
To see the contents of each command, type HELP , command name (e.g. PLAY )
and press ENTER; this brings an explanation of the command and its usage on
the display:
>help play
Command : PLAY
Purpose : Send recordings from memory to serial port
Usage : PLAY hh:mm , hh:mm = rec starting time (optional)
if command is used without parameters it uses default setting
>
7.3.4 ? Outputting the HMI41 settings
If you need to know which parameters and settings are currently stored in your
HMI41 indicator, type ? and press ENTER:
>?
HMI41 / 2.01
Serial number : A0000000
Output units : metric
Baud P D S : 4800 E 7 1 FDX
Pressure : 1013.25
Auto Off : 5
Probe : 2
Start-up mode : 1
4.th variable : none
>
To exit the terminal session, move the cursor to FILE menu and select EXIT .
Confirm that you wish to quit and then select whether you wish to store the
parameters of this session for future use or not (
SAVE - YES / NO ).