Vaisala HMP42 - Manual (Page 38)

HMI41 AND HMP42
Operating Manual
M210317EN-A
34
Figure 7.1.2 Selecting the parameters in Windows 95 and NT
7.2 Transferring the data
When you have given the communication parameters, you can start
transferring the data from the HMI41. Store the parameters for future use.
To start transferring the data, make sure that the HMI41 is connected to a
serial port of your computer and that the terminal session is open. Turn the
HMI41 on and a text similar to the following appears:
HMI41 / 2.01
>
7.2.1 PLAY Transferring the data
To transfer the data on your PC, type PLAY and press ENTER; an example of
outputting automatically collected data:
>play
Reading Log... OK
data hh:mm:ss RH T Td
0 00:00:00 12.54 21.53 -8.48
1 00:01:00 12.10 21.23 -9.16
2 00:02:00 12.18 21.18 -9.12
3 00:03:00 12.12 21.15 -9.21
4 00:04:00 12.16 21.14 -9.18
5 00:05:00 12.09 21.12 -9.27
6 00:06:00 12.09 21.09 -9.28
>