Vaisala HMP42 - Manual (Page 67)

HMI41 AND HMP42
M210317EN-A Operating Manual
63
4. TRANSFERRING THE MEASURED DATA TO A PC
Give the communication parameters when using this terminal session for the
first time; save them for future use. See instructions in the following tables.
Table 4.1 Giving parameters in Windows 3.1
MENU DESCRIPTION
P ROGRAM M ANAGER
ò
A CCESSORIES double click
ò
T ERMINAL double click
ò
Settings click
ò
Communications
click and select parameters
(see list below); click OK
ò
move the cursor to:
File click
ò
Save as click and save settings: type
the name of the file (e.g.
HMI41) and click OK
Turn the HMI41 on and follow the instructions in Ch. 4.2
The communication parameters are:
• connector
according to your computer
• baud rate
4800
• data bits
7
• stop bits
1
• parity
even
• flow control
none