Posey Pillow Pal - Manual

Therapy and ambulaTion Quality Products since 1937
M6001 042309
6319
The Posey Pillow Pal is a versatile product. When
placed between the legs, the Pillow Pal helps alleviate
back pain by maintaining spine and hip alignment.
When placed behind the head, the Pillow Pal helps
facilitate head and neck alignment. The pillowcase helps
prevent contamination of the Pillow Pal.
• Measures 8’’ L x 10½’’ W (20 cm x 27 cm).
• Polyurethane foam construction.
• Unique slit design helps provide flexibility.
REF
6319 Pillow Pal, complete set with pillowcase
Pillow Pal
Features:
MoNitoriNG
Be sure to follow your facility’s policies and
guidelines for frequency of patient monitoring. Posey
recommends that this product be removed at least every
two (2) hours to check for skin integrity, proper circulation
and range of motion.
iNsPeCtioN
Inspect before each use: check for broken
stitches; or torn, cut or frayed material. DO NOT use soiled or
damaged products.
aPPliCatioN iNstruCtioNs
leG aPPliCatioN:
1. Place the flat section of the Pillow Pal between the legs,
slightly above the knees (Fig. 1). Adjust the position of
Pillow Pal as appropriate for maximum comfort.
Head aPPliCatioN:
1. Position the flat section of the Pillow Pal under the head
to aid in proper head and neck alignment. The Pillow Pal
can be placed behind the head either lengthwise (Fig. 2)
or width wise (Fig. 3) depending on the user’s preference.
Adjust position of Pillow Pal as appropriate.
Fig. 1
lauNderiNG iNstruCtioNs:
Posey Pillow Pal Pillowcase only:
Fig. 2 Fig. 3
Slit design
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA
Phone: 1.800.447.6739 • Fax: 1.800.767.3933 • Web: www.posey.com
© 2009 Posey Company. All rights reserved.
posey
®
pillow pal
disPosal
Properly dispose of the product per facility’s policy for
BIOHAZARDOUS materials.
storaGe aNd HaNdliNG
This device is designed for use in normal indoor environments.
This device may be stored in ambient warehouse temperatures
at normal humidity levels. Avoid excess moisture or high
humidity that may damage product materials.
LATEX