Posey Soft Rails - Manual

M6031 REV C 080712 © 2012 Posey Company. All rights reserved.
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014
Posey Soft Rails are a safe alternative to side rails and help prevent
patients at risk for falls from rolling out of bed, while allowing sufficient
space for patient comfort. The adjustable bolster may be repositioned
to accommodate individual resident needs, or may be completely
removed. The Posey Soft Rails easily attach to the bed with quick-
release buckles and are available in machine washable brushed
polyester, or wipe clean vinyl covers.
REF 5716 Soft Rails, Double Bolster, Brushed Polyester Cover
REF 5716SC Soft Rails, Double Bolster, Vinyl Cover
REF 5718 Soft Rails, Single Bolster, Brushed Polyester Cover
REF 5718SC Soft Rails, Single Bolster, Vinyl Cover
Product Features:
• Soft, durable foam bolsters help deter unassisted bed exit, and
reduce the risk of rolling out of bed.
• Removable/adjustable bolster increases the ease of patient bed exit.
Also acts as a positioning device to increase patient comfort.
• Quick-release buckles allow for easy attachment to the bed.
• 33” (84 cm) length helps guard against rolling out of bed, without
restricting bed exit.
• 17” (43 cm) width between bolsters provides a comfortable sleeping
area without restricting patient.
• Foundation measures 33”L x 33”W (84 cm x 84 cm) and will fit on top
of a standard twin and hospital style bed.
• Individual bolsters are 33”L x 8”W x 8”H (84 cm x 20 cm x 20 cm).
• Attachment straps are 35” (89 cm) long.
• Meets CA #117, Section E Flame Retardancy Standards.
Monitoring
This device is not a substitute for side rails or other
protective devices for patients at risk of injury from falls due to
unassisted bed exit. ALWAYS follow your facility’s policies and
procedures for patient assessment, monitoring and rehabilitation.
Application instructions:
1. Inspect product prior to use. DO NOT use soiled or damaged
products.
2. Orient the Posey Soft Rails so that the removable bolster is on the
“bed exit” side of the mattress. Place the Posey Soft Rails on top of
the mattress with quick-release buckles away from the resident.
3. The Posey Soft Rails should be positioned approximately 18” (46 cm)
from the headboard.
4. Wrap the quick-release straps once around the movable part of the
bed frame and secure the buckles.
5. To remove the adjustable bolster, simply pull up to detach from the
foundation.
6. To reattach the bolster, press down firmly to connect the hook-and-
loop.
5718 - Brushed Polyester
5716 - Brushed Polyester
5718SC - Vinyl
5716SC - Vinyl
Washing Instructions - Brushed Polyester Cover:
Remove outside cover and machine wash (gentle cycle) in warm
water; tumble dry low.
Cleaning Instructions - Vinyl Cover:
Wipe clean with soap and water or disinfectant.
Disposal
Properly dispose of the product per facility’s policy
for BIOHAZARDOUS materials.
Storage and Handling
This device is designed for use in normal indoor environments. This
device may be stored in ambient warehouse temperatures at
normal humidity levels. Avoid excess moisture or high humidity
that may damage product materials.
Posey
®
Soft Rails
BED SAFETY