Posey Exit Alarm Mat - Manual (Page 2)

Cleaning:
• Make sure pad has no visible cuts or signs of damage.
• Dampen a clean cloth with disinfectant. Take extra care when cleaning sensor plugs.
• NEVER: use any cleaner that contains Phenol or Benzyl; immerse in liquid; or sterilize with heat.
• Dry with a clean cloth.
Storage:
• This device is designed for use in normal indoor environments.
• This device may be stored in ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity
that may damage product materials.
Disposal:
Dispose of per facility policy for BIOHAZARDOUS material. Be sure to follow all laws that apply.
Warranty:
REF
8250S - This product is warranted for one (1) year from date of first use.
REF
8250L - This product is warranted for one (1) year from date of first use.
See Posey Catalog for Warranty details.
1. 2. 3.
1. Strip 1/4” (0.63 cm) of the gray cable cover to expose the four thin colored wires. DO NOT cut through the colored wires.
2. Place RJ11 plug over the correct colored wires, as shown in the diagram above.
3. Crimp RJ11 plug using a standard RJ11 crimping tool, making sure the colored wires are secure.
Note: RJ11 phone connectors and crimping tools are available at most hardware and/or electronic parts stores.
BOttOM - VIEW FROM CONtACt SIDE
tOP - VIEW FROM tAB SIDE
Sensor RJ11 Connector Replacement
the instructions below should be performed by a trained technician or qualified biomed personnel.
Posey ® Exit Mat Sensor (Cont.)
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014 • Web: www.posey.com
FALL MANAgEMENt