beautypg.com

Troubleshooting – Maxsa Innovations Solar-Powered Aluminum 80 LED Solar Security Light User Manual

Page 7

background image

7

troubLEShootIng

probLEM

poSSIbLE SoLutIonS

light will not switch

on when there is

movement in the

detection area.

ensure that the power switch on the main body has

been turned to the auto position.

ensure that the motion sensor has been positioned to

face oncoming movement.

ensure that the battery has been fully charged in direct

sunlight for 3 sunny days. Refer to the “before first use

of your solar security light” section on page 4.

check to see that the solar panel is facing south so that

it receives direct sunlight for most of the day, enabling

the battery to fully charge.

check to see that the luX control has not been set too

far towards ( ). setting the luX control too far towards

( ) will cause the solar security light to turn on only in

complete darkness.

check to see that the motion sensor is not near night

time light sources such as street lights.

light switches on

during the day.

the luX control may be set too far towards the (

)

position.

Reposition the motion sensor.

light switches on for

no apparent reason.

the sens control may be set too far towards the (+)

position.

Moving trees, traffic, pets or birds may be getting in the

area of detection. this may be unavoidable, however

the sensor could be redirected to a height where this is

less likely to occur.

if there are reflective objects in the detection area such

as windows, water, or white walls, you may need to

redirect or possibly reposition the motion sensor.

test the motion sensor by covering it completely with

cardboard and waiting several minutes to make sure

it does not detect motion. if the light still switches on,

please contact MaXsa for further assistance.

light quickly flashes on

and off.

battery charge may be low. turn the power switch

to the off position and charge the battery for three

(3) sunny days with the solar panel placed in direct

sunlight.

Move the luX control more to the (

) position.

light is not as bright as

normal.

battery charge may be low. turn the power switch

to the off position and charge the battery for three

(3) sunny days with the solar panel placed in direct

sunlight.