Maxsa Innovations Solar-Powered Aluminum 80 LED Solar Security Light - Manual (Page 5)

5
counter-clockwise (–). increase or decrease the time period by adjusting the tiMe
dial and re-trigger the sensor unit. continue with this process until the desired time
period is obtained. note: it is best to keep it on the shortest time period that works
so that you conserve battery life.
MotIon SEnSor ADjuStMEnt (SEnS)
the sensitivity of the motion sensor on this solar security light will be affected by
temperature. the cooler the temperature, the more sensitive the motion sensor
will become. use the sens dial to adjust the sensitivity of the motion sensor to
compensate for environmental temperature changes. the motion sensor is most
sensitive when the sens dial is turned fully clockwise (+).
LIght LEvEL ADjuStMEnt (LuX)
the luX dial controls the natural light level that triggers the solar security light.
your solar security light comes preset and will be activated when motion is
detected at dusk. to have it be lighter or darker out when the solar security light
is triggered, adjust the light level control as needed.
how to tESt thE covErAgE
Point the motion sensor in the direction that you want to detect motion and set
the tiMe dial to the minimum (-) position and the luX dial to “light” () position.
test the coverage of the area by walking slowly around the area of detection and
adjust sensitivity if needed. if the solar security light does not come on, you may
need to adjust the angle of the sensor unit. Readjust the tiMe and luX dials when
finished.
rEpLAcIng thE bAttErIES
When the charging ability of the batteries decreases, you can replace the batteries
with three new niMH 2100 mah batteries. follow the steps below.
Front Back
1. Move the power switch on the main body to the off position.