Maxsa Innovations Solar-Powered Aluminum 80 LED Solar Security Light - Manual (Page 6)

6
2. Remove the screw on the left side of the unit that holds the mounting bracket.
3. Remove the main unit from its mounted surface.
4. once the unit is open, slide down the battery cover.
5. carefully remove the batteries from their compartment and replace with three
new rechargeable niMH 2100 mah batteries.
6. close the plastic cover and reassemble the metal cover and the main body
together with the screw removed in step 2, ensuring that the two parts are put
together securely.
7. Repeat the steps in “before first time use of your solar security light” section
on page 3 to ensure your new battery is fully charged.
notE: Do not dispose of batteries in general household trash or into a fire since
the batteries may explode. consult your local regulations for correct disposal
of batteries. the batteries may also be returned to MAXSA Innovations at 8412
cathedral forest Dr., fairfax Station, vA 22039. Do not take apart the batteries
since they contain corrosive chemicals.
MAIntEnAncE tIpS
the led lights in your solar security light will last up to 30,000 hours and should
never need replacement.
to keep your solar security light looking new, keep the lens free of dust and
deposits by wiping occasionally with a dry cloth or with warm soapy water.
it is important that the solar panel is kept free of dirt and debris at all times. a dirty
solar panel will not allow the batteries to be fully charged. this will shorten the life
of the battery and may cause the light to malfunction.
StorAgE
if you wish to store your light indoors for more than two or three days, turn the
power switch to the off position to prevent damage to the batteries. battery
capacity may be reduced during prolonged storage. for optimal performance, we
recommend that you do not store your solar security light for prolonged periods
of time.