Maxsa Innovations Solar-Powered Aluminum 80 LED Solar Security Light - Manual (Page 2)

2
carefully remove and identify all the parts from their protective packaging and lay
them out in front of you.
IncLuDED pArtS:
Metal housing screw
Light sensitivity adjustment knob
Motion sensitivity adjustment knob
Duration adjustment knob
Motion sensor
Lens
Solar panel
Solar panel
angle pivot
2 mounting screws
(for main body)
Solar panel
mounting bracket
AUTO / OFF switch
Main battery unit
4 screws and anchors for
mounting solar panel
15 foot power cable
once you have identified all parts, connect
the solar panel to your solar flood light
by plugging the 15 foot cord into the cord
attached to the bottom of the solar flood
light. turn and twist the cords while pressing
firmly together until they are attached tightly.
adjustment dials are located behind the
motion sensor. the dials may be rotated to the front for ease of adjustment. after
adjustments are completed, the adjustment dials should be rotated back to face
the wall and have the arrow on the bottom facing the front.