beautypg.com

Maxsa Innovations LED Flag Light User Manual

Maxsa Innovations Lighting

background image

Model #: 40334

IMPORTANT:

Read all instructions carefully before use.

ASSEMBLY AND OPERATING INSTRUCTIONS

The Perfect Solar Light for Flags or Signs

Your MAXSA Solar Flag Light converts sunlight into electricity during

the day, enabling the Super bright LED light to turn on automatically

at night to light up your flag.
Your Solar Flag Light can light for up to 5 hours at full power and 10

hours at half power / brightness when the battery is fully charged.

The 3 sealed rechargeable AA size Ni-MH 1200 mAh batteries

included with this product should last for many years before they

need to be replaced.

ABOUT YOUR SOLAR FLAG LIGHT

Page 1

Carefully remove and identify all the parts from their protective

packaging and lay them out in front of you.

INCLUDED PARTS

MOUNTING TO A FLAGPOLE
To mount on a flagpole, position the flagpole mounting bracket

supplied against the flagpole and run the two supplied metal bands

through the bracket as shown.
Put the bracket up to the pole and close the metal bands around the

pole, making sure the bands are pulled tight so the light is firmly

secured.

CAUTION: Do not tighten the metal bands until your Solar Flag

Light is placed where you want it. The bands cannot be reopened.*

HOW TO INSTALL YOUR SOLAR FLAG LIGHT

BEFORE USING YOUR SOLAR FLAG LIGHT
If you are able to: Charge the batteries without activating the unit by

keeping the power switch turned off on the main body for one day

while your solar panel is in direct sunlight. This will ensure that the

batteries in your Solar Flag Light have a full charge prior to normal

operation.
After the initial 1 day charge of your Solar Flag Light, press the switch

on the main body to the ON position to make the light turn on

automatically after sundown. Set the switch to the OFF position to

turn on the light manually. Your Solar Flag Light is now ready for use.
Depending on how long you prefer the light to last, you can double

the light duration and reduce the brightness by pushing the bright-

ness control switch so that you get 5 -6 hours of light at full brightness

or 10-12 hours at ½ brightness so you can light up your flag all night.

OPERATING YOUR SOLAR FLAG LIGHT

Position the solar panel so that it faces the southern sky. Placing the

panel in a shaded location will not allow the batteries to charge fully,

reducing the number of hours the light will operate per evening.
The Solar Powered Flag Light is equipped with a light-sensitive

trigger to automatically turn the light on at dusk. For best perfor-

mance, ensure that the Flood Light is not placed near nighttime light

sources such as porch lighting and street lighting.

CHOOSING A LOCATION