Connections – Rosendahl bonsaiDRIVE User Manual

Page 5

- 8 -

4. Connections

(C1) (C2) (C3) (C4)(C5) (C6) (C7) (C8) (C9)

(C10) (C11)(C12) (C13) (C14) (C15 - C17) (C18 - C20)

(C1) Options Ports:
for bonsaiSDI 270 Mbit SDI option and bonsaiLAN Ethernet option.

(C2) Word Output:
1 x BNC socket, 48 KHz Wordclock out for synchronising peripheral audio
units.

(C3) Sync Input:
1 x BNC socket, Genlock in for connection of a PAL or NTSC black and burst
video sync. Note: Accuracy of video sync signals must be within broadcast
specs.

(C4, C5) Timecode Output, Input:

2 x RCA Timecode in, Timecode out for synchronising bonsaiDRIVE with
other video and audio recorders.

(C6, C7) Analog Audio Outputs:
2 x RCA socket. Variable output level per menu up to +9dBU = fullscale.
Low output impedance for driving professional line inputs.

(C8, C9) Analog Audio Inputs:
2 x RCA sockets. Variable input sensitivity per menu up to +9dBU = fullscale.
Input impedance 10 k

Ω

(C10) Mains socket:
Use the IEC mains cable supplied for connecting to an earthed mains socket
90-230 VAC, 50-60 Hz.

(C11, C12) Digital Audio Output, Input:
2 x Optical Toslink sockets. Digital audio interface for simultaneous record
and playback of 8 audio tracks with 48Khz/ 24 Bit in the Alesis-ADAT©
Format.

- 9 -

(C21) (C22) (C23) (C24)

(C13/ C14) MIDI Output, Input:

2 x DIN sockets for the transmission of MIDI signals for MTC synchronisation
and MMC control. Also used for bonsaiDRIVE firmware updates using MIDI
SYSEX.

(C15 - C17) Video Outputs:
3 x BNC sockets. Can be configuered as composite video on C17 and as
Y/C (S-Video) on C16, C15 or as a component signal (Y,Pb,Pr) on C17, C16,
C15.

(C18 - C20) Video Inputs:
3 x BNC sockets can be configuered for composite video input on C18, Y/C
(S-Video) input on C20, C19 or a component signal (Y, Pb, Pr) on C20, C19,
C18.
All inputs are internally terminated with 75

Ω

(C21) bonsaiREMOTE Port:
9 Pin Sub D for connection of the bonsai remote control.

(C22) GPIOs Port:
15 pin Sub D connector for switching signals. 4 Inputs, 4 Outputs.

(C23) bonsaiDRIVE Port:
9 Pin Sub D for connection of the bonsaiDRIVE to the remote panel.