Rosendahl bonsaiDRIVE - Manual (Page 13)

- 24 -
If a CRC error occurs, the software update process is stopped and
indicated by the red [RECORD] LED, without the [
◄ ] and [ ► ] LEDs.
After a successful firmware update the recorder starts and shows the
new firmware version and the serial number.
The previous menu settings are saved but should be verified, as the
new firmware possibly contains new features and settings.
After a prematurely terminated update process all menu settings are
lost and return to the default values.
The upload of firmware versions 00.50 and higher consists of two
parts where the first flashes the bonsaidrive itself and the second the
optional bonsaiLAN module.
bonsaidrives without bonsaiLAN module installed will boot up already
after the first part of the firmware update.
This manual contains two parts:
(I) the General Information part and
(II) a software descriptive part related to the firmware installed in
which the menu details are described.
- 25 -
Instruction Manual
Rosendahl bonsaiDRIVE
Part II
This part of the manual is a description of software functions
and will depend on the firmware version it describes.