Aquacal LTM0266 - Manual (Page 41)

Page 35
SECTION 6 - APPENDIX
6.1 Available Accessories
NAME PART # DESCRIPTION
EXTERNAL FLOW SWITCH KIT
0040S

Used for automatic pool / spa thermostat
switching.

Use when the pool / spa elevation is
higher than the heat pump.

Use when a two-speed circulation pump
in low-speed mode does not provide
enough water pressure to activate a heat
pump
’s water pressure switch.
AUTOMATIC SEQUENCING
CONTROLLER
Call Customer Support for
correct configuration and
part number.
An Automatic Sequencing Controller (ASC)
prevents simultaneous startup of multiple
heat pumps.
Site voltage drop is minimized and utilities
are not subjected to large in-rush demands of
electrical current.
REMOTE CONTROLLER
STK0070
External microprocessor kit allows for full
control of the heat pump from up to 100 feet
from the equipment.
Table 15
6.2 Schematics
Check Table 16 for appropriate schematic.
MODEL DOCUMENT # VOLTAGE
Schematics (WS03, WS05, & SP05) LTM0107 208-230 VAC, 60 Hz and 200-220 VAC, 50 Hz.
Schematics (WS03, WS05, & SP05) LTM0213 208-230 VAC, 60 Hz.
Schematics (WS05 & SP05) LTM0110 208-230 VAC, 60 Hz and 480 VAC, 50 Hz.
Schematics (WS10) LTM0196 200-230 VAC, 60 Hz and 480 VAC, 60Hz.
Table 16