Aquacal LTM0266 - Manual (Page 18)

Page 12
4.1.d Electrical Cutouts
WS03, WS05 and SP05
BOTTOM
Figure 10
WS10
BOTTOM
Figure 11
4.2 Placing Heat Pump
4.2.a Positioning Clearances

Confirm adequate clearance is provided above and around heat pump to permit access panel
removal during equipment maintenance and service. Do not place objects such as shrubs, bushes,
lawn furniture, chemical containers, etc. immediately adjacent or on top of heat pump. These items
can prevent access and may result in damage to the heat pump.

The unit should be located at least 18 inches from any wall and at least 18 inches between units to
permit rear plumbing and electrical connections.

Follow all applicable local, state, and national requirements relative to spacing from other objects or
equipment.
1-3/8 in [3.5 cm]
7/8 in [2.2 cm]
1-3/8 in
[3.5 cm]