Night Owl NODVR108-500GB - Manual (Page 30)

29
12.6 Maintain Menu
Use the Maintain Menu to update the system
’s firmware, restore factory
default settings, reboot the device, and set an automatic system reboot
schedule.
To access the Maintain Menu select System from the Main Menu, and then
select Advanced from the System menu, then select Maintain from the
Advanced menu.

Auto Reboot: Choose On/Off if you would like your system to
automatically reboot based on the scheduled time.

Settings: With Auto Reboot turned On, the DVR will reboot
automatically on a specified schedule in which you set to help
prevent system and hard drive failure and to preserve the life your
DVR.

Firmware Update: This button is used to perform a firmware update
from a USB flash drive.

Load Defaults: This will load DVRs settings to factory defaults.
Once loaded your DVR will automatically restart.

Reboot: Reboots the DVR.
Chapter 12 System Menu