GReddy TURBO KITS: VW Golf 1.8T 2002-05 / TD04-19T - Manual (Page 12)

(3) Place the provided downpipe to fit inside the cut
catalytic converter. Connect the muffler piping
to the other end of the catalytic converter.
※ Align the marks of the exhaust clamp and
install. Refer to 2-8 in instructions.
(4) Weld the catalytic converter and downpipe in a
few spots before removing from the vehicle to
weld completely.
Spray welded portion with high temperature
paint to prevent rusting.
Please use proper protective equipment
when welding.
ｐｏｓｔ （rear） ｐｒｅ （front）
Rear Turbo side
(5) Install the pre and post 02 sensors in the front
tube.
※ Use caution when installing 02 sensors
(6) Place the provided gasket on the turbo exhaust
outlet and install downpipe onto turbocharger.
※ Check the muffler clearance and angle while
installing the down pipe.
〈Parts № 40,52〉
(7) Install the factory heat shield and connect the
02 sensor harness connectors. Install the
connector cover.
11