GReddy TURBO KITS: Nissan 350Z HR 2007-08 / twin TD06SH-20G - Manual (Page 14)

―１４―
2. Install the Exhaust Manifold using provided gasket and hardware.
(Part Used #5, 6, 74, 94)
Left Side (Driver’s Side) Right Side (Passenger’s Side)
3
33 3- -- -6 6 6 6 Turbocharger Installation Turbocharger Installation Turbocharger Installation Turbocharger Installation
• Install the turbocharger on to the exhaust manifold installed in the previous step.
* For the left side, remove the steering shaft joint before installing the turbo.
* For the left side, remove starter harness and harness bracket.
For the left side, remove the bolts holding the starter, and lower the starter before installing the
turbo
(Part Used #1, 2, 33, 34, 75, 93)
•
After the turbo installation, double check the fuel line clearance by the turbo and the manifold on
right side (passenger side).
•
Connect the Oil Pressure line to the turbo using the provided hardware.