GReddy TURBO KITS: Infiniti G35 coupe 2003-04 / twin TD05H-18G - Manual (Page 12)

•
Wrap the Starter and the Main Engine
harness right above the transmission bell
housing.
Important!
Make sure that the main engine harness is
properly wrapped and secured away from
the manifold and the wastegate when they
are installed.
Caution!
Without proper clearance and thermo wrapping the harness, it melt and cause a short
in the electrical system or may catch on fire.
Power Steering Line Installation
1. Remove the hose fitting off the power
steering pump and install the provided
fitting.
(Parts Used #40, 45)
2. Cut the provided 15
∅
hose to 200mm (8in)
and install it between the pump and the
tank.
(Parts Used #33)
Oil Pan Installation
Install the Oil pan with a silicone sealant.
(Part Used #29)